Specifiction: Camera FOV:120° Max Still Photo Resolution: 2560×1440 Max Video Resolution: FHD: 1080/30fps / HD: 720/30fps Max Video Bitrate: 16 Mbps Photo Format: JPEG Video Format: MP4 Sensor: CMOS 1/4″; Effective pixels: 5 MP Operating Temperature Range: -10 to 40 °C (14 to 104 °F)
Narrow Infrared Units: Effective Range : 6 m (in indoor lighting conditions) Effective Area: Varies from 10°to 40° Effective area decreases as distance from the target increases.
Wide Infrared Units: Effective Range : 3 m (in indoor lighting conditions) Effective Width: 360° (in indoor lighting conditions)
Hit Detector: Detection Requirements: For the Hit Detector to be activated, the following conditions must be met: Gel bead diameter ≥ 6mm, launching speed ≥20m/s, and the angle between the hit direction and hit detector plane is no less than 45°. Maximum Detection Frequency: 15 Hz
DJI Robomaster S1: Weight: Approx. 3.3 kg Dimensions: 320×240×270 mm (length × width × height) Chassis Speed Range: 0-3.5 m/s (forward) 0-2.5 m/s (backward) 0-2.8 m/s (sideways) Max Chassis Rotational Speed: 600°/s
M3508I Brushless Motor: Max Rotational Speed: 1000 rpm Max Torque: 0.25N*m Max Output Power: 19 W Operating Temperature Range: -10 to 40 °C (14 to 104 °F) Driver: FOC Control Method: Closed-loop speed control Protection: Overvoltage/Overtemperature/Soft-start/Short-circuit/Chip and sensor anomaly detection
Control: Controllable Launching Frequency: 1-8/s Max Launching Frequency: 10/s Initial Launching Speed: Approx. 26 m/s Average Load: Approx. 430
Gimbal: Controllable Range: Pitch: -20° to +35°/ Yaw: ±250° Mechanical Range: Pitch: -24° to +41° / Yaw: ±270° Max Rotational Speed: 540°/s Vibration Control (on the flat surface): ±0.02°